This is my journey to build an Vans RV14 from plans. With the exception that I have later decided to order the RV14 Quick Build Wing. Building mostly alone I was worried about riveting well do to the large size of the wings.
I decided to install a Matco parking brake. I started with the cable to see how much control throw I would have.
Then put the valve o nte bracket and started to imagine how to mount it up. The L bracket it something I added during the build knowing I might install a parking brake.
This was the basic bracket mount that I came up with.
Its getting real, cut the tubes from the kit to install the valve.
Ordered some new tube components.
Started to measure and cut the tubes to length and installing end fitting and into the valve.
New lines are installed valve and ready to go into the airplane.
Valve temporarily installed to check the 3D mounting plate. You can see the black plastic below the valve. I had to reinforce it with fiberglass for now till version 2 gets printed.
The lines come from the left side brake cylinders into the Matco valve, then to the respective sides on the firewall.
All I need now is figure out the mounting bracket and the cable. This is the 3D bracket before I reinforced it with fiberglass. Gonna print another version that is more rigid.
