Wednesday, September 1, 2021

FWF OP-62 Sniffe tube and Tunnel flap

 RV14 Build June 21

I ordered the pre-made sniffle tube as part of my aircraft specialty hose kit. Made this install very easy.

Another view of the sniffle, I did change to the one way valve on the bottom of the intake first.

Tunnel flap all together and chase tape installed.

Tunnel flap screwed into place.

Getting the cable length correct was a bit of a pain in the ass. Very tight space.

Finally got a cable that I like.


EXP 119 Mods 11 Man Hours 

at
Labels: ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Before Start and First flight testing

 R14 Build August & September 21 Testing Getting into the fun stuf!! Putting gas in for the first time. Have the airplane up to get 15 d...

  • Rudder and Vertical Stabilizer
    I got to the shop everyday last week! I feel like I made a ton of progress. I finished the rework of the Vertical Stabiler parts that I had ...
  • Before Start and First flight testing
     R14 Build August & September 21 Testing Getting into the fun stuf!! Putting gas in for the first time. Have the airplane up to get 15 d...
  • Inventory and..My first mistake :(
    I did the inventory on all the hardware today, that was an additional 2 hours of Inventory work. But well worth it to know everything was...
  • Vertical Stabilizer
    Vertical Stabilizer I finished riveting the VS on Wednesday and Thursday. I needed to finish up the rear spar now that I realized the 410 ...
  • Aft Fuselage
    RV 14 Build August 10 & 27 Aft Fuselage Been moving slow this August getting the airplane built. Seems like I keep making little mi...
  • FWF OP-62 Exhaust
     RV14 Build June 21 Exhaust Working on the exhaust hangers. You cut the metal to length then squeeze 1 end to cause it not to be round a hav...