Wednesday, June 9, 2021

FWF Section 49 Fuel and Oil System

RV14 build June 21

Fuel and Oil

Most of the hoses I hooked up before I installed the motor since access was easier. Not that the sensor block is in I was able to hook the hoses to that.

And torque the fuel pump fittings finally.

Somehow Im missing a fitting for the fuel flow sender but I have 1 installed.

Started to work on the oil cooler install.

Cutting the oil cooler spacers.

The mount and inlets are ready to go to anodize.

Back from anodizer time to assemble


Oil cooler with Steel fittings not the aluminum ones that come in the kit

Added some RTV and installed.

Oil cooler all installed


Fuel and Oil System 8.0 Hours









at
Labels: ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Before Start and First flight testing

 R14 Build August & September 21 Testing Getting into the fun stuf!! Putting gas in for the first time. Have the airplane up to get 15 d...

  • Rudder and Vertical Stabilizer
    I got to the shop everyday last week! I feel like I made a ton of progress. I finished the rework of the Vertical Stabiler parts that I had ...
  • Before Start and First flight testing
     R14 Build August & September 21 Testing Getting into the fun stuf!! Putting gas in for the first time. Have the airplane up to get 15 d...
  • Inventory and..My first mistake :(
    I did the inventory on all the hardware today, that was an additional 2 hours of Inventory work. But well worth it to know everything was...
  • Vertical Stabilizer
    Vertical Stabilizer I finished riveting the VS on Wednesday and Thursday. I needed to finish up the rear spar now that I realized the 410 ...
  • Aft Fuselage
    RV 14 Build August 10 & 27 Aft Fuselage Been moving slow this August getting the airplane built. Seems like I keep making little mi...
  • FWF OP-62 Exhaust
     RV14 Build June 21 Exhaust Working on the exhaust hangers. You cut the metal to length then squeeze 1 end to cause it not to be round a hav...