RV14 Build September 12
Attachment
Since Im still waiting on a bracket and the next kit I started to mess around with attaching the components today.
Doing this wasn't in the plans yet, but I wanted to see it all together!
Measured the bolt grip length and labeled them, also labeled the bags with the socket size. Should have done this a long time ago.
Vertical stabilizer Mounting plate is installed!
I thought this would be hared to get the rod end bearings close to the correct distance but it was relatively straight forward, the threats move it a lot with 1/2 a turn when you are close so its easy to tell where you should be.
Left Elevator installed on the horizontal Stabilizer!
Doing this wasn't in the plans yet, but I wanted to see it all together!
Measured the bolt grip length and labeled them, also labeled the bags with the socket size. Should have done this a long time ago.
Vertical stabilizer Mounting plate is installed!
Just looks so good!
Installed the trim motor finally, now the Elevator section is technically done!
I thought this would be hared to get the rod end bearings close to the correct distance but it was relatively straight forward, the threats move it a lot with 1/2 a turn when you are close so its easy to tell where you should be.
Left Elevator installed on the horizontal Stabilizer!
Attachment 2.0 Hours
No comments:
Post a Comment